The design of the distance between the solar street lights and the height of the poles should be based on the width of the road and the size of the lighting area required, the height of the solar street light poles, the distance between the street lights, and the width of the road surface, as well a   Read More>

The cause of the flicker may be that the load current is too large or the load voltage is too small, which is lower than the low output voltage of the power supply, resulting in automatic protection. The LED lamp beads do not match the LED drive power. Normally, a single 1W lamp bead can withstand   Read More>

LED street lights are divided into all off and some off, if all are off, you must consider whether the LED street lights have tripped. If it is tripped, you can pull the brake directly. In this case, you can check the power distribution control cabinet, open the power distribution control cabinet, a   Read More>

When installing solar street lamps, consider the basic pouring, check whether the installation site is backfilling. If it is backfilling, the foundation pit should be deepened to increase the stability of the solar streetlights. When installing, try to avoid installing in low-lying roads. .1: The in   Read More>