What are the tips for installing solar street lights?

When installing solar street lamps, consider the basic pouring, check whether the installation site is backfilling. If it is backfilling, the foundation pit should be deepened to increase the stability of the solar streetlights. When installing, try to avoid installing in low-lying roads. .

1: The installation time of solar street lights must be selected on sunny days, so it is not possible to complete the charging quickly after installation. If it is discharged at night, it will not achieve good results, and it will affect the service life of solar street lamps.

2: Pay attention to the orientation of the battery board. The solar street light bracket is usually made at the angle of inclination before leaving the factory. Just ensure that it faces the south when installing, and ensure that there is no obstruction around, which affects the light conversion efficiency of the panel.

3: Because it is considered to be affected by the rainy weather, it is recommended that the controller choose a high-quality product with waterproof function, so as to better ensure the stability of the solar street lamp. If it is not, you can place the terminal as far as possible, and the wiring should be as far as possible. Complete U-shape, which can also improve certain waterproof ability.

4: The characteristics of the battery are buried deep below the frozen soil layer to maintain the temperature balance and effectively improve the charging and discharging efficiency of the battery.

5: Wiring. The solar street light system is a low-voltage system, which mainly distinguishes between positive and negative electrodes. After determining the positive and negative poles of the battery board, light source, and battery, strictly follow the wiring instructions on the controller.