How to install solar street lights

How to quickly install solar street lights? In order to facilitate transportation, solar street lights are usually disassembled and assembled at designated locations. Therefore, it is important for the operator to understand the specific assembly method, in order to have a good effect. So how do solar street lights be installed quickly?

How to quickly install solar street lights

First, prepare tools when assembling solar street lights.

The main tools are: multimeter, hex wrench, Phillips screwdriver, needle-nosed pliers, insulating tape and other tools. Once the tools are ready, you should choose a safe environment and get close to where you are using them.

However, when assembling, you should have an understanding of the specific assembly sequence. Different assembly sequences and corresponding effects will naturally differ.

Second, when installing, you should use a gasket.

When installing solar street lamps, the gasket should also be used. The main function is to prevent wear and tear, which can extend the service life of the street lamps.

Third, when unpacking, the corresponding parts should be counted according to the list form.

If it is missing, you should know about solar street lights in time. Of course, it is also necessary to check the condition of the parts, because in the course of transportation, it is inevitable that the parts will be damaged. Once a damage condition is found, it should be replaced.